Home to your favourite videos, and podcasts.
All our 3D printing articles in one place
3dflyingbear.com website coupon: “G6YT10” Today we’re unboxing the Flying bear Ghost 6, a FDM 3D printer. Let’s see what all we get in the box. First off, we find the printer hood, which helps keep the temperature more consistent within the printer. Here’s a flier with flying bears social media links. And here’s the printer, […]
I had reviewed the Anycubic photon mono 4K, maybe a year back? The resin I used earlier was by Anycubic and they are petroleum based. These resins stank up my house and my printer was out of commission for a few months due to that. Until I found out about these, plant based EC UV […]
I have been printing on FDM or fused deposition modelling 3D printers for years now and I wanted to get my feet wet into SLA printing. SLA printers are starting to get more affordable now and I have the Anycubic photon mono 4k with me, so let’s see what the advantages and disadvantages are with […]
Do you like retro games, Mario, Contra, and many more. For a lot of us it brings back memories of long hours glued to the TV. Today we’re going to relive those days by installing RetroPie on a Raspberry Pi. I also wanted it to be compact enough to be able to carry along during […]
Stl to 3d Print case: https://www.thingiverse.com/thing:1698162 I’ve had the Raspberry Pi for quite some time now and was thinking on what new projects I could work on using this. One thing which actually stops me from using this, even though it can be powered via a power bank, is, it still is not […]
In an earlier Instructable I had listed steps to make your own 3d bust or 3d selfie as some call it. I had a Kinect lying around, hence I could make it. But if you do not have one, how do you still make your own 3d scans. Watch on to find out. The Kinect […]
One of the most common tasks when you own a 3D printer is changing the filament. You might want to switch filament types, or your filament might have snapped in between, and you would need to empty what’s left in the extruder, before you re-insert from the spool. So, in this Tutorial I show you […]
I’ve had the Skr Mini E3 and the BL-Touch lying in my room since January, as I had installed the Skr Mini board into my 3D printer earlier, the time has come to install the BL-Touch to the printer. So, let’s get started. The steps in this video are more for the SKR mini E3 […]
Here’s the SKR Mini E3, I purchased this off Biqu Bigtreetech’s website. It’s been sitting on the shelf since Mid-January, at last I got around to installing it . Opening it up, we have heatsinks for the servo controllers, the main SKR Mini E3 controller board, a rubber ducky. Bigtreetech places a rubber ducky […]
If you are not able to tell what’s special about this, it’s supposed to be a model of me. I was surprised at how easy it was, so let’s go step by step on how I made myself. I’ve been into 3d printing for a month maybe. Trying out a lot of techniques, and learning […]